Ranger RCI-2950DX User Manual

Browse online or download User Manual for Grass trimmers Ranger RCI-2950DX. The Defpom Ranger RCI 2950 Mods Page

  • Download
  • Add to my manuals
  • Print
  • Page
    / 10
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
The Defpom Ranger RCI 2950 Mods Page
Ranger RCI 2950 modifications for the older (non DX) and
newer models (DX)
RCI-2950 DX (Second Generation)
I was sent this e-mail from a visitor to my site, enjoy.
I have news on the RCI 2950 dx. The way you convert the channels is that there is a jumper in the
bag with the mic clip, you add that jumper to the block behind the face plate, put it on the pins on the
right hand side, only one jumper and you will get 24.000-32.000 !
There is nothing to clip in this radio for mod. just turn up the one on the inside that says modulation.
Everything is marked on the inside by name, am power, SSB power, and any other power. If tuned
right it will key 3 watts and swing to 35 watts, thank you Joe L.
The EPT695010z board can be modified in the way described.
RCI-2950 DX (First and Second Generation)
The radios with the board number EPT695011Z, which some people say aren't able to be modified
can be, but only with a frequency expansion module. (see First Generation DX)
The only place I have found offering them is Panther Electronics and The Quack Shack
Using this module and the jumper in the way described will result in Frequency coverage from
21.000MHZ to the top of the 10 meter band.
Without the jumper, the radio will cover 24-32MHz.
Thanks to Matt for sending me this info !
How to get down to 21.000MHz with the above module installed
The radio must have the module connected to RX/TX from 32.000 - 24.000 MHz.
http://www.radiomods.co.nz/ranger2950mods.html (1 di 10)12/09/2009 22:45:57
www.r6-ru4montesecchieta.it
IZ5CCV
Page view 0
1 2 3 4 5 6 7 8 9 10

Summary of Contents

Page 1 - IZ5CCV

The Defpom Ranger RCI 2950 Mods PageRanger RCI 2950 modifications for the older (non DX) and newer models (DX)RCI-2950 DX (Second Generation)I was sen

Page 2

The Defpom Ranger RCI 2950 Mods PageFor you 2970 owners another choice exists. Use the RB or SWR signal to turn the power amplifier on and off.Locate

Page 3

The Defpom Ranger RCI 2950 Mods PageOpen radio on the speaker side.Face the back of the radio towards you so the front panel is away from you.Looking

Page 4

The Defpom Ranger RCI 2950 Mods PageEasiest way of identification on these is the green display and they actually say 2950DX right on them.The DX is a

Page 5

The Defpom Ranger RCI 2950 Mods PageHere are some pics of the "E Chip" http://www.radiomods.co.nz/ranger2950mods.html (4 di 10)12/09/2009 22

Page 6

The Defpom Ranger RCI 2950 Mods PageAgain, thanks go to Larry of The Quack Shack for supplying me with and authorising me to use this information. RC

Page 7

The Defpom Ranger RCI 2950 Mods PageIf you remove it you will have coverage from 26.000-29.700 MHzIf you place it on pins P1 and P2 you will have cove

Page 8

The Defpom Ranger RCI 2950 Mods PageNext press [MAN] to get to the CB band mode and move to CH1...press the mic-key and you hear a "buzz" fr

Page 9

The Defpom Ranger RCI 2950 Mods PageMore mods sent to me by a visitor TALKBACK AND AUTOSQUELCH IN THE RANGER WITHOUT DRILLING HOLES FOR SWITCHESTired

Page 10

The Defpom Ranger RCI 2950 Mods PageNow at this point you will connect the wire (green) from the CPU board to roger beep (you removed it from the 6 pi

Comments to this Manuals

No comments